Finishing 101: Choosing and Applying Clear Transparent Coatings to Wood W/ Mitch Kohanek



topcoats-all-general-finishes-open-2014

Finishing 101: Choosing and Applying Clear Transparent Coatings to Wood

Tuition: $150 

Materials: $20

Sept. 15th, 10am-5pm

Class Description:

This informative one day Finishing 101 class teaches you how to choose transparent finishes for wood and includes  hands on learning using rags, pads, brushes and HVLP spraying equipment.

When choosing a finish for your project, your first considerations should be what kind of protection your project really needs, and what do you want it to look like. Oils, shellac, lacquer, varnish, urethane, water base are your choices. How do you choose one over the other? Where you are going to do your finishing is also something to consider. Last but not least is choosing the method of applying your choice of finish, rags, pad, brush or spray.

SPONSORED BY:

FIN-GeneralFinLogo_1

Festool Logo

 

IMG_0957

 

Student Required Supplies:

Sanding Block: WWC Recommends : 158293

Dust mask or respiratory protection

Bring in your HVLP spray gun with an air regulator if you have one.

Can opener

Blue tape

Apron

Brush referral:
Mitch has some suggestions of brushes to choose from to bring to class. They are not mandatory, but If you already know what finish you like to use, here are some brushes to consider. Note: The size of the brush should fit the size of the projects you like to work on.
Grammercy Brush- (White bristles) one inch or two inch size. Works well for shellac and water base.
Dick Blick Mega Golden Synthetic Filbert Brush- (Size 30 or 40). Works for shellac and water base.
Woodcraft Onyx White Chine Bristle, 2”size- For oil base varnishes or brushes lacquer

Note:

Bring any brushes or applicators you have been using to have Mitch review to see if you’re using the proper tools for each technique/application.  It will also be helpful for each student to bring in any small-medium size plastic containers for finish storage during the class.

 

MK

Mitch Kohanek Biography

 


Date(s)
Sept. 15th

Time
10:00 AM - 5:00 PM

Instructor
Mitch Kohanek

Location
The Woodworkers Club

Registration is no longer available for this class.



Select "PayPal": Logon to you Paypal account OR pay as a "Guest" with your credit card.

Select "Pay Offline": Pay by check (Send your payment to The Woodworkers Club, 11910-L Parklawn Drive, Rockville, MD 20852) OR call us with your credit card.

Your registration will not be confirmed until we receive payment. Once registered, we will send you an email confirming your registration.