Have most of the tools you need to complete your project already, but don’t know where to get that beautiful piece of raw lumber planed? Need to cut up a piece of plywood to fit it into your car? At a loss for how to sharpen your saw blades? We can help with our milling and cutting services.
We Now Offer CNC
Custom Milling & Cutting Cost:
Material Milling and Cutting
| Thickness | Millwork* | Price per linear foot** |
| 4/4, 5/4 |
S2S | $ 0.75 |
| S3S | $ 0.85 | |
| S4S | $ 0.95 | |
| 6/4, 8/4 |
S2S | $ 1.50 |
| S3S | $ 1.75 | |
| S4S | $ 2.00 |
*S2S: Planing on two sides
S3S: Planing on two sides and one good edge
S4S: Planing on two sides and two good edges
**$10 min. + labor ($99/Hr) 20 minute min.
Thickness Sanding: $20.00 Min.
General International Dual Drum Thickness Sander finishes to 120 grit.
Plywood: Purchase plywood here and the first 3 cuts free, $ 2.00 per cut after 3
Sharpening Services:
| Router Bits | $6.75 |
| Large Router Bits | $9.50 |
| Two Wing Raised Panel Bits | $11.50 |
| Three Wing Raised Panel Bits | $13.00 |
| Four Wing Raised Panel Bits | $15.00 |
| HSS Knives (per inch) | $.70 |
| Carbide Knives (per inch) | $.80 |
| Carbide Tipped Saw Blades = or < 40T (per tooth) | $0.45 |
| Carbide Tipped Saw Blades > 40T (per tooth) | $0.35 |
| Dado Blades (must include the entire dada set for accuracy) | $42.00 |
| Retoothing (per tooth) | $4.00 |
| Lathe Tools (per tool, price dependent on condition) | $8-$16.00 |
| Chisels (per tool, price dependent on condition) | $10-$18.00 |
| Plane Irons (per iron, price dependent on condition) | $10-$20.00 |
Carbide Shaper Cutters (Price dependention on size) $21.00-38.00
Small Hand, dovetail, back, hole, and compass saws (per saw) $14.00
Large Hand, dovetail, back, hole, and compass saws (per saw) $22.00
Retip router bits and shaper cutters (Price quotes upon inspect)
Please allow a minimum of one week from drop off date for completion.
Thursday is the pick up/drop off day for send outs.